Formwork tables VARITABLE PLUS

Description

VARITABLE PLUS by Variant is a fast and efficient way of forming large-area slabs. The system can be easily adjusted to varying structural and architectural designs (loads, shapes, concrete surfaces etc.) Once assembled, a complete table unit can be positioned, adjusted, stripped and repositioned to a new area of concrete placement using minimal labor. The table can be shifted along the slab using Variant’s shifting trolley. In order to gain maximum efficiency, VARITABLE PLUS can be easily combined with VARITABLE and VARIFLEX systems.

Consisting of high-grate system components, Waling 12 (as main beams) and H20 beams (as secondary beams) VARITABLE PLUS system has several distinctive features, compared with VARITABLE System:

• High load bearing capacity.
• Faster and simpler assembly.
• Integrale working platforms.
• System solutions for forming drop beams and stop-ends.
• Swivel-heads make it easy to move the tables out over parapets.

Load-bearing capacity:

• Due to its load-bearing flexibility, VARITABLE system can be adapted to withstand loads of fresh concrete of different kinds of slab thicknesses. Optimal and cost-effective use within a range of slab thicknesses up to 500 mm..
• Maximum table form height—6.0 m.

System adaptability:

• Can easily be combined with VARITABLE and VARIFLEX systems.
• Any type of form-facing can be selected

Easy handling and planning:

• Any requirements in architectural concrete flat slab design can be met.
• Can cover a wide area of practical applications.

Safe use:

• Integrated working platforms for save and easier handling of the system.
• Safe working already during assembly.

Cost-effective:

• Due to complete repositioning of the units, the time and labor is cut short.
• Outer drop beam and slab can be formed using one system.
• Table form can be horizontally repositioned without using crane.
• Fewer parts speed up assembly.
• High durability resulting in lower the expense.
• Reduction of expenses by means of system adaptability.

Main features of the system:

• Higher load bearing capacity comparing to VARITABLE system.
• Consisting of high-grate system components: Waling 12 (as main beams) and H20 beams (as secondary beams).
• 4 standard formats: 2.50 x 4.00 m./ 2.50 x 5.00 m./ 2.00 x 4.00 m./ 2.00 x 5.00 m.
• Maximum slab height up to 6.00 m.
• The tilting mechanism of the swivel head enables to fold and fix props at an angle of either 75 or 90 for lifting tables out across parapets and railings.
• The swivel head is easy to relocate along primary beam.
• Wedge-lock of the swivel head makes it easy to attach and detach props.
• Pre-assembled table for facing with any desired form ply.